|
| Injection
Unit |
| System |
In-line
screw |
| Injection
Unit |
H-150U |
H-200AU |
| Injection
stroke |
in |
6.61 |
5.91 |
| Screw
diameter |
in |
1.10 |
(1.26) |
1.26 |
1.42 |
1.57 |
| Nominal
injection capacity |
in³ |
6.28 |
8.24 |
7.37 |
9.36 |
11.44 |
| Injection
capacity (PS) |
oz |
3.24 |
4.48 |
4.02 |
5.08 |
6.28 |
| Injection
rate |
in³/sec |
11.22 |
14.73 |
7.37 |
9.36 |
11.44 |
| Max.
Injection speed |
in/sec |
11.81 |
11.81 |
7.87 |
7.87 |
7.87 |
| Max.
Injection pressure |
psi |
31,284 |
24,174 |
31,284 |
27,729 |
22,752 |
| Max.
Holding pressure |
psi |
25,596 |
21,330 |
28,440 |
24,885 |
19,908 |
| Screw
revolution |
rpm |
~350 |
~350 |
| Nozzle
pressure force |
U.S.ton |
2.20 |
2.75 |
| Hopper
capacity |
gal |
10.6 |
10.7 |
| Clamping
Unit |
| Clamping
system |
Double
toggle |
| Clamping
force |
U.S.ton |
90 |
| Clamping
stroke |
in |
12.60 |
| Min.
mold height |
in |
5.91 |
| Max.
mold height |
in |
16.14 |
| Tie-bar
clearance ( H x V ) |
in |
14.76
x 14.76 |
| Die
plate size ( H x V ) |
in |
21.26
x 20.67 |
| Ejector
force |
U.S.ton |
2.8 |
| Ejector
stroke |
in |
3.15 |
| Others |
| Heater
capacity |
kw |
5.4 |
| Machine
dim. ( L x W x H ) |
in |
151.6
x 41.2 x 61.8 |
| Machine
weight |
lbs |
6380 |
|
| Notes: |
- *mark figure varies depending
on molding conditions.
- Figures in
are optional.
- The applicable max. injection pressure and
holding pressure will be restricted according
to the material in the real molding operation.
- The figures for the max injection rate and
the max. injection speed are calculated ones.
The actual injection rate and injection speed
will be restricted by pressure. Actual setting
pressure may be restricted by molding conditions
and cycle time.
- The figures are subject to change without
any legal obligation on the part of the manufacture.
- A large-sized screw may not be applicable
to some kinds of material.
|
| |
|
TOP
 |
|
